1987 - Headless Build

Around 1987, I fell in love with the Steinberger P series guitar. So naturally this would be a perfect candidate for building a copy. I started this build in early 2012. Hopefully, I'll finish this one up in few months. I've routed the body for two Humbuckers. I've also routed an inset for the bridge. Steinberger's bridge is inset about 10 mm. The JCustom Bridge that I'm using is not as thick. As a result I only had to route about 1.5 mm.

Next up, I'll just need to route the rear access panel and an output jack. Then it's on to final shaping and sanding.